Displaying Connection Information For Aps; Displaying A List Of Aps That Are Not Configured - Nortel 2360 Configuration Manual

274 Configuring APs
(For information about the fields in the output, see the
Reference.)

Displaying connection information for APs

To display connection information for APs configured on a WSS, use the following command:
show ap global [ap-num | serial-id serial-ID]
This command lists the System IP addresses of all the WSS switches on which each AP is configured, and lists the bias
for the AP on each switch. For each AP that is configured on the switch on which you use the command, the connection
number is also listed.
Connections are shown only for the APs that are configured on the WSS from which you enter the command, and only
for the Mobility Domain the switch is in.
To display connection information for all APs configured on a WSS, type the following command:
WSS# show ap global
Total number of entries: 8
ap Serial Id
1 11223344
- 11223344
2 332211
- 332211
17 0322100185
- 0322100185
18 0321500120
- 0321500120 10.4.3.2
serial IDs 11223344, 332211, 0322100185, and 0321500120. Each AP is also configured on one of two other WSSs,
with system IP addresses 10.3.8.111 and 10.4.3.2. The bias for the AP on each WSS is listed. Normally, a Distributed
AP boots from the WSS with the high bias for the AP. (For more information, see
for APs" (page 204) and
The ap field indicates the connection number of each AP on the WSS on which the command is typed. A hyphen ( - ) in
the ap field indicates that the AP is configured on another WSS in the same Mobility Domain.

Displaying a list of APs that are not configured

To display a list on APs that are not configured, use the following command:
show ap unconfigured
The following command displays information for two APs that are not configured:
NN47250-500 (320657-F Version 02.01)
WSS IP Address
10.3.8.111
10.4.3.2
10.3.8.111
10.4.3.2
10.3.8.111
10.4.3.2
10.3.8.111
HIGHThis command indicates that four Distributed APs are configured on the WSS, with
"Boot process for distributed APs" (page
Nortel WLAN Security Switch 2300 Series Command Line
Bias
HIGH
LOW
LOW
HIGH
HIGH
LOW
LOW
208).)
"Resiliency and dual-homing options