Displaying Wlan Mesh Services Information - Nortel 2360 Configuration Manual

Wlan-security switch 2300 series
Hide thumbs Also See for 2360:
Table of Contents

Advertisement

When wireless bridging is enabled for a service profile, the APs with the applied service profile are bridge peers. When
a Mesh AP associates with a Mesh Portal AP through this service profile, the Mesh Portal AP automatically configures
the Mesh AP to operate in bridge mode.
The show service-profile command indicates if bridging is enabled for the service profile.

Displaying WLAN Mesh Services Information

The show ap status terse command indicates which APs are Mesh APs and which are Mesh Portal APs.
For example:
WSS# show ap status terse
Total number of entries: 120
Operational: 1, Image Downloading: 0, Unknown: 119, Other: 0
Flags: o = operational, b = booting, d = image downloading
c = configuring, f = configuration failed
a = auto AP, m = mesh AP, p = mesh portal
i = insecure, e = encrypted, u = unencrypt
AP Flag IP Address
Model MAC Address
--- ---- --------------- --------- ----------------- ------ ------ -------------------------
7 om-u
2332-A1 and 2332-E1 00:0b:0e:00:ca:c0 D 1/1 D56/1 19h47m
The show ap status command displays the mesh services attributes for an AP and the associated BSSID of the Mesh
Portal.
For example:
WSS# show ap status
AP: 1, IP-addr: 10.8.255.10 (vlan 'corp'), AP model: 2332-A1 and 2332-E1,
manufacturer: Nortel, name: AP01
====================================================
State:
operational (not encrypt)
CPU info: Atheros:MIPS32 speed=220000000 Hz version=AR5312, ram=16777216
s/n=111111 hw_rev=n/a
Uptime: 0 hours, 0 minutes, 11 seconds
Uplink BSSID: 00:0b:0e:17:bb:00
Radio 1 type: 802.11g, state: configure succeed [Enabled] (802.11b protect)
operational channel: 6 (Auto) operational power: 18
bssid1: 00:0b:0e:fd:fd:cc, ssid: public
RFID Reports: Inactive
Antenna Link Calibration: Enabled
Radio 2 type: 802.11a, state: configure succeed [Enabled]
operational channel: 36 operational power: 17
bssid1: 00:0b:0e:fd:fd:cd, ssid: mesh-ssid (mesh)
The show mesh links command displays information about the links an AP has to Mesh APs and Mesh Portal APs.
WSS# show ap mesh-links 1
AP: 1 IP-addr: 1.1.1.3
Operational Mode: Mesh-Portal
Downlink Mesh-APs
-------------------------------------------------
Radio1 Radio2 Uptime
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Configuring WLAN mesh services 289

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

23502361Wlan 2382

Table of Contents