Follow These Steps - Agilent Technologies E7473A Getting Started Manual

Installing the Software
Installing the Software
Installing the Software
If your software has not been pre-installed, before you begin installing the
software, your computer system must be configured with the minimum
requirements. Check

Follow These Steps

Do This
1 Connect the pen tablet to your LAN via the
2 Once connected to the LAN, insert the CD-
3 Using the Windows Explorer, over the LAN
4 Click Next when you are ready to continue the
5 If you wish to install the program in a folder
6 Select which language you would like to see
Agilent Wireless Solutions
"Computer Requirements" on page
LAN card that was factory-installed. (If you did
not purchase your pen tablet PC from Agilent,
you may need to use another means to install
the software, such as a CD-ROM.)
ROM that came with your system into a host
computer that is accessible via the LAN.
locate the computer that contains the Indoor
Wireless Solutions CD-ROM, and double-click
setup.exe.
installation. Type your name and the name of
the company you work for, then click Next.
other than the default, click Browse to display
text. When the correct destination folder
appears in the field, click Next.
the online help and tutorial displayed in, click
Next.
65.
See This
Confer with your system administrator for
information and assistance on connecting your
pen tablet PC to your company's LAN.
When the Welcome screen appears on the host
computer, choose Cancel, since you are not
installing on the computer containing the CD, but
onto the pen tablet.
A Welcome dialog box appears instructing you to
close any currently running Windows
applications before you begin installation.
The "Choose Destination Location" dialog box
appears. The default folder for installation is
C:\Program Files\Agilent Technologies\E74xx
(depending on the system you're installing).
The Setup Type box appears.
For more information see "Online Help and
Tutorial Language Options" on page 55
53