Safety and Regulatory Information
Warning and Caution Notices
Instrument Markings
Agilent Wireless Solutions
When you see this symbol on your instrument, you should refer to the
instrument's instruction manual for important information.
!
This symbol indicates hazardous voltages.
The laser radiation symbol is marked on products that have a laser output.
This symbol indicates that the instrument requires alternating current (ac) input.
This symbol indicates that the instrument requires direct current (dc) input.
The CE mark is a registered trademark of the European Community. If it is
accompanied by a year, it indicates the year the design was proven.
The CSA mark is a registered trademark of the Canadian Standards Association.
ISM 1-A
This text indicates that the instrument is an Industrial Scientific and Medical
Group 1 Class A product (CISPER 11, Clause 4).
This symbol indicates that the power line switch is ON.
This symbol indicates that the power line switch is in STANDBY position.
The C-Tick mark is a registered trademark of the Spectrum Management Agency
N279
of Australia. This signifies compliance with the Australian EMC Framework
Regulations under the terms of the Radio communications Act of 1992
This symbol indicates that the power line switch is in OFF position.
99