Preparing To Take Indoor Measurements - Agilent Technologies E7473A Getting Started Manual

Loading, Connecting, and Using the Backpack

Preparing to Take Indoor Measurements

Preparing to Take Indoor Measurements
Once all equipment has been configured, and the backpack has been loaded
correctly, you are ready to make measurements. The indoor test system relies
on the user inputting positional information. This is done by setting waypoints
where measurements are to be taken against an imported map file.
The user moves from one waypoint to the next and, as each waypoint is
highlighted, measurements are interpolated from the last checked point.
There is no need for a GPS or other positional information. Positions relative
to external GPS coordinates can be defined during the setup procedure.
To Start the Software
Do This
1 Choose the Start menu and click Programs
2 Click Agilent E74xx (the name of your
3 Click
NOTE
As an alternative to using the pen for input/selections, you can display a pen-
activated keyboard (including all standard keys and function keys) on the
screen. To do that, choose
Agilent Wireless Solutions
Agilent Wireless Solutions)
Agilent E74xx Series to start the
software.
See This
A sub-menu should appear, listing the
components of the Wireless software.
The copyright screen appears for a few seconds,
then the software appears on your screen, ready
to use.
Note: The first time you start the software you
have the opportunity to run the online tutorial, a
tool that is designed to help you get the most
from the software.
Start > Programs > PenX 1.51 > Onscreen Keyboard
.
47