Installing the Software
Installing Other Drivers
Installing Other Drivers
Pen tablets purchased from Agilent Technologies (86154A, option 30) have
all required software pre-installed, including:
•
Serial I/O software driver. Agilent includes the Socket Ruggedized Dual
Serial I/O card™. See Chapter 3, "Software Setup" of the Serial I/O ™
and Ruggedized Serial I/O Card ™ User's Guide for instructions on
installing the software for that specific card.
•
USB serial converter software driver (if you are using a USB serial
converter) Agilent includes Inside Out Network's Edgeport 4.
•
LAN card software driver. Agilent includes the 3COM
Megahertz LAN card.
If you are supplying your own pen tablet, you must install a software driver
for any devices that you are using. These are separate from the Agilent indoor
measurement system software and are included with the device itself. Refer to
the installation instructions that come with the device.
Agilent Wireless Solutions
®
10/100®
61