Welcome - Agilent Technologies E7473A Getting Started Manual

Welcome

Welcome
Thank you for choosing Agilent Technologies. In this guide, you'll find the
setup instructions you need to begin taking indoor measurements.
Follow These Steps
To Do This
1 Load the backpack with equipment.
2 Connect the equipment and turn it on.
3 Put on the backpack and begin taking
measurements.
If You Need Help...
To Do This...
Get training
Get help
Confirm the contents of
your system.
Online Getting Started Guide
This guide has been installed in PDF
the typical installation. You can also check the following web site for the
latest version:
http://agilent.com/find/manuals, and then search for your system type.
1. Portable Document Format - online version that can be viewed using Adobe
Acrobat reader. For more information, refer to
Agilent Wireless Solutions
See This
"Arranging Hardware in the Backpack" on
page 13
"Connecting the Hardware" on page 17
"Suiting Up to Take Measurements" on page 36
See This
http://agilent.com/find/networks
Check the web site for information about training registration, software
updates, phone support, FAQs, and more.
Once you start the software, press F1 to use the extensive help system.
Agilent System Information Guide (also available on the CD-ROM that
came with your system).
1
format on your hard drive as a part of
http://www.adobe.com.
®
5