Table of Contents
Advertisement
Figure 3-15 Installing a fabric module (S12508G-EF)
(1) Push the fabric module slowly into the slot
(2) Rotate the ejector levers inward until the spring clips lock the ejector levers in place
Installing a filler panel in a fabric module slot
Install a filler panel in a fabric module slot if you are not to install a fabric module in it.
To install a filler panel in a fabric module slot:
1.
Orient the filler panel with the target slot and insert it into the slot.
2.
Align the four captive screws with the installation holes in the slot and fasten the captive screws.
3-13
Advertisement
Chapters
Table of Contents
