Installing Cable Management Brackets On The S12508G-Ef - H3C S12500G-EF Series Installation Manual

Installing cable management brackets on the S12508G-EF

The S12508G-EF came with two identical cable management brackets installed at the two sides of
the chassis front panel.
To install a cable management bracket:
1. Identify the installation position for the cable management bracket.
A cable management bracket has mark A.
2. Align the captive screws on the cable management bracket with the holes in the mounting
bracket.
3. As shown in
the mounting bracket.
As a best practice, use a torque of 5.5 kgf-cm (0.54 Nm) to fasten the captive screws.
Figure 3-8 Cable management bracket (S12508G-EF)
Figure 3-9, fasten the captive screws to secure the cable management bracket to
3-7