Connecting The Power Cord - H3C S12500G-EF Series Installation Manual

Figure 3-21 Removing the power module slot adapter (S12516G-EF)
(1) Loosen the captive screw
(2) Use your thumb to press the power module slot adapter while squeezing the opening in the adapter
with your fingers
(3) Pull the power module slot adapter part way out, and then pull it rightwards to disengage the left tabs
from the chassis
(4) Pull the power module slot adapter out
Figure 3-22 Installing a PSR2400-12AHAH-B power module (S12516G-EF)

Connecting the power cord

CAUTION:
• Power on the device after you have installed fan trays on the device.
• Make sure each power cord has a separate circuit breaker.
• Turn off the circuit breaker before you connect the power cord.
3-19