Repacking The Chassis - H3C S12500G-EF Series Installation Manual

Figure 9-2 Removing the device from the rack (S12516G-EF)
(1) Loosen the captive screws that attach the mounting brackets to the rack
(3) Slide the chassis out of the rack along the slide rails

Repacking the chassis

1. Align the left and right edges of the chassis bottom with the left and right positioning lines
respectively on the wooden pallet base. See
Figure 9-3 Wooden pallet base
1
(1) Wooden pallet base
(3) Right positioning line
(5) Front of the base (same direction as the front panel of the chassis)
2. Use screws to attach L-type brackets to the chassis, as shown by callout 2 in
2
9-4
Figure 9-3 for the wooden pallet base.
3
4
(2) Left positioning line
(4) Screw hole
(2) Chassis handles
5
Figure 9-4.