Labels For Devices; Filling In Labels; Affixing Labels; Affixing A Label To A Network Cable - H3C S12500G-EF Series Installation Manual

Labels for devices

A device label is used to identify the device name, model, address, installation date, and so on.

Filling in labels

You can print or write desired contents on labels. HP recommends that you print labels.
To print labels, select a label printer and a label template as needed. For more information about
using a label printer, see the user guide of the printer.
To write labels, use black markers. A marker has two nibs. Be sure to use the smaller nib to write
labels.

Affixing labels

After printing or writing a label, remove the label from the bottom page and affix it to the network
cable, or the identification plate of the power cord.

Affixing a label to a network cable

Typically, a label is affixed 2 cm (0.79 in) away from the connector on a network cable. You can affix
the label to other positions as needed.
vertically.
Figure 7-4 Affixing a label
Adhesive side
Figure 7-5 shows the affixed labels when the cable is laid vertically and horizontally.
Figure 7-4
1
4
7-3
shows how to affix a label when a cable is laid
2
TO:
B02 03 12
5
3