Chapter 15. General Routing Guidelines; Signal Name Conventions - Nvidia Jetson TX2 NX Manual

Table of Contents

Advertisement

Chapter 15. General Routing Guidelines

15.1

Signal Name Conventions

The following conventions are used in describing the signals for Jetson TX2 NX:
Signal names use a mnemonic to represent the function of the signal. For example,
Secure Digital Interface #3 Command signal is represented as
to distinguish it from other text. All active-low signals are identified by an asterisk (*) after
the signal name. For example,
signals do not have the underscore-N (_N) after the signal names. For example,
indicates an active-high signal. Differential signals are identified as a pair with
SDMMC_CMD
the same names that end with _P and _N or for USB 2.0, DP and DN (for positive and
negative, respectively). For example,
signal pair.
The signal I/O type is represented as a code to indicate the operational characteristics of
the signal. The following table lists the I/O codes used in the signal description tables.
Table 15-1.
Signal Type Codes
Code
A
DIFF I/O
DIFF IN
DIFF OUT
I/O
I
O
OD
I/OD
P
NVIDIA Jetson TX2 NX
SYS_RESET*
CSI_0_D0_P
Definition
Analog
Bidirectional Differential Input/Output
Differential Input
Differential Output
Bidirectional Input/Output
Input
Output
Open Drain Output
Bidirectional Input / Open Drain Output
Power
SDMMC_CMD
indicates an active-low signal. Active-high
and
indicate a differential
CSI_0_D0_N
, written in bold
DG-10141-001_v1.1 | 71

Advertisement

Table of Contents
loading

Table of Contents