Kaleido-RCP2
Configuring Unicast IP Addresses
make other changes using the Configuration menu, and only exit, once you are done with
the changes.
Configuring Unicast IP Addresses
The unicast IP feature enables a Kaleido-RCP2 to find up to three Kaleido systems on
different subnets and connect to them (via network gateways), while maintaining
connections to Kaleido systems in its own subnet.
Notes:
• To navigate the Kaleido-RCP2 menu, press the 2 key to move up, or the 8 key to move
down.
• There is no need to configure unicast IP addresses for Kaleido systems on the same
subnet as the Kaleido-RCP2.
To configure a unicast IP address on the Kaleido-RCP2, do the following:
1 Press and hold the ENTER button until the ESC button lights up to access the
2 Select ETHERNET OPTIONS on the LCD display, and then press ENTER.
3 Select Unicast host IP, and then press ENTER.
4 Select Enable IP 1, and then press ENTER.
5 Select Host IP ADDR, and then press ENTER.
6 Using the numeric keypad, type the IP address of a Kaleido system on a remote
7 Repeat step 4 to step 6 to add unicast IP addresses for up to three remote Kaleido
Restoring Default Parameters
The Kaleido-RCP2's Configuration menu provides an option to restore the device's default
parameters. This option is called FACTORY DEFAULT.
Select this option to revert the following elements to their default values:
• The network parameters.
• The room selection.
• The login position.
18
Configuration menu.
The Enable IP n parameter instructs the Kaleido-RCP2 to query the Kaleido system
at the selected IP address for a list of rooms.
subnet, and then press ENTER.
systems.