Table of Contents
Advertisement
The Kaleido-RCP2 is a compact control panel for the Kaleido multiviewers. Featuring direct
key control for the most common commands, it provides easy multi-room, multi-operator
control over Ethernet, with local connections for a mouse and a keyboard.
Description
The Kaleido-RCP2 is a compact, freestanding controller. All operating controls are located
on the top of the unit. It requires only a single Ethernet cable for both connectivity and
power. It also provides two USB ports allowing a USB mouse and one standard keyboard or
numeric keypad to be connected.
• Note: Multi-function keyboards or numeric keypads that have a built-in USB hub do
not work when connected to the Kaleido-RCP2. No other device than a mouse, a
numeric keypad without USB hub, a keyboard without USB hub or special function keys
can be connected to the Kaleido-RCP2.
When logged on to a Kaleido multiviewer via the Kaleido-RCP2's Ethernet connection, you
can control various operating features of the multiviewer.
Connections
The Kaleido-RCP2 is equipped with three connectors, located on the inside rear supports of
the case.
Ethernet / Power Port
The power for the Kaleido-RCP2 arrives on an RJ-45 connector, and shares this connector
with an Ethernet interface. The Kaleido-RCP2 conforms to the IEEE 802.3af standard for
powered devices.
1
Kaleido-RCP2
9
Advertisement
Table of Contents
