Table of Contents
Advertisement
Kaleido-RCP2
Keypad
Keypad
The keypad buttons have double functions. Use the MOUSE LOCK button (top left) to
switch between the two modes:
Numeric
Mouse
Number key
2
8
4
6
7
9
Display and Operating Keys
The LCD display shows messages and text entries. The operating keys let you connect to a
Kaleido system, navigate menus, and control the behavior of your Kaleido-RCP2's functions.
LOGIN
ESC
ENTER
PANEL ENABLE Enable/disable all other keys on this
• Note: To reset the control panel, simultaneously press ESC, ENTER, and DEL.
Configuration
Before you can use your Kaleido-RCP2 to operate your Kaleido system, you must set up the
Ethernet connection between the two devices.
• Note: The Kaleido-RCP2 is powered through the RJ-45 Ethernet connector. There is no
power ON/OFF button, so the device is ON when a powered Ethernet cable is
connected.
12
All buttons at low brightness,
alpha-numeric function as printed
on each button is enabled.
Numeric function disabled, and
some keys are assigned mouse-
equivalent functions. The MOUSE
LOCK button and the mouse-
function keys are bright.
Mouse-equivalent function
Pointer up
Pointer down
Pointer left
Pointer right
Click
Right-click
Log on to a multiviewer system
through the Ethernet interface
Menu navigation
Menu navigation
control panel, to prevent accidental
operation
Advertisement
Table of Contents
