Table of Contents
Advertisement
Action
Press and hold the ENTER
button until the ESC button
lights up to access the
Configuration menu,
Press ENTER again to obtain
the list of rooms from all
Kaleido systems currently
available on the network.
Press the 8 key twice, until
the room you wish to select
(i.e. RMC) appears on the
display. (Press 2 to scroll in
the opposite direction.)
Once the display shows the
desired room name, you can:
• press ENTER to select
this room
• press ESC to cancel the
selection
and return to the previous
menu level in the menu.
Press ESC to exit the
Configuration menu.
Enabling or Disabling DHCP
The following table shows how to enable or disable the automatic allocation of an IP
address from a server. This option is commonly called DHCP (the protocol that is used for
LCD indication
Configuration
ROOM SELECTION
For some time until the list is
received:
Acquiring room list...
Once the room list is
received:
ROOM Select
RMA
ROOM Select
RMC
Configuration
ROOM SELECTION
RMC
Kaleido-RCP2
Installation and Operation Manual
Other buttons
Digit keys 2 (UP) and 8
(DOWN), and the
ENTER and ESC
buttons are lit; other
digit keys are dimmed
Digit keys 2 (UP) and 8
(DOWN), and the
ENTER and ESC
buttons are lit; other
digit keys are dimmed.
All buttons are
dimmed.
15
Advertisement
Table of Contents
