Layout Presets
The ten numbered keys laid out across the top of the panel are used to recall saved layouts
to the monitor wall, and are also used to save layout.
• Pressing and holding one of the preset buttons for 8 seconds will store the current
layout to that button, allowing the user to easily return to it later.
• The layout associated with each button can be configured beforehand in XEdit.
You can insert a labeled strip into the built-in slot located above the keys to identify the
saved layouts.
Functions
These function keys activate operating modes or functions on the multiviewer.
CHANNEL
ASPECT RATIO
LOAD
• Note: The exact functionality of these buttons is determined by the configuration of
the Kaleido system.
Audio
UP ARROW
DOWN ARROW
MUTE
-20dB
AUDIO
MONITORING
FULL SCREEN
ALARM
INHIBIT
SAFE AREA
UNDERSCAN
SAVE
UNLATCH
STATUS
Increase the audio monitoring volume
Decrease the audio monitoring volume
Mute the audio monitoring (push on/push
off)
Attenuate the audio monitoring gain by 20dB
(push on/push off)
Audio source selection
Kaleido-RCP2
Installation and Operation Manual
11