Firmware Update (Step 2 Of 3) - GRASS VALLEY KALEIDO-RCP2 Installation And Operation Manual

The next window includes step-by-step instructions for uploading the data file to the
Kaleido-RCP2:

Firmware Update (Step 2 of 3)

To proceed with the firmware update
1 On the Kaleido-RCP2, press and hold the ENTER button until the ESC button lights up to
access the Configuration menu.
2 Press ENTER to select the first option: ROOM SELECTION, and then wait until the room
list is downloaded to the Kaleido-RCP2.
3 Once the room list is available, press 8 repeatedly until [System\Updater] appears on
the LCD display (press 2 to move back if necessary), and then press ENTER
4 Press the LOGIN button twice, and then wait until the position data is downloaded to
the Kaleido-RCP2.
5 Once the position data is available, select the position Update Now!, and press ENTER.
The Kaleido-RCP2 prompts you for a password.
6 Type "6472632" (i.e., "Miranda"), and then press ENTER. The Kaleido-RCP2 downloads
the new firmware from your PC. Progress information is shown in the Status section of
the Kaleido-RCP2 Updater window on your PC.
• Note: If a network problem occurs and the Kaleido-RCP2 stops downloading the
The Kaleido-RCP2 validates the data, copies it into the main memory and then reboots.
You can follow the progress of this step on the Kaleido-RCP2 screen.
IMPORTANT
Transferring the new firmware data to the main memory takes several minutes. Do
not disconnect the Kaleido-RCP2 while it is updating its firmware, as this may result in
a fatal error. In this event, it will be necessary to return the unit to Grass Valley to be
reprogrammed.
firmware, go back to step 5.
Kaleido-RCP2
Installation and Operation Manual
21