Kaleido-RCP2
Verification (step 3 of 3)
7 Once the Kaleido-RCP2 has rebooted following the successful firmware upgrade, click
Next in the Kaleido-RCP2 Updater window, on the PC. The final screen includes
instructions for verifying that the new firmware is installed and functional:
Verification (step 3 of 3)
To verify that your RCP2 is updated properly:
1 On the Kaleido-RCP2, press and hold ENTER until the ESC button lights up, to access the
Configuration menu.
2 Select the option DEVICE INFO, and then press ENTER.
3 Select the first option, VERSION, by pressing ENTER again.
The Kaleido-RCP2 displays the currently-installed version of the firmware.
If this number matches the version number in the updater file you selected in the in the
first step (see Firmware Selection (Step 1 of 3)), then the update has been successful.
4 In the Kaleido-RCP2 Updater window on your PC, click Close to exit the updater.
Operation
Many of the operational functions of the Kaleido-RCP2 are determined by the configuration
of the Kaleido operating environment, and are explained in the Kaleido-X User's Manual.
Selecting a Position and Logging On
To use your Kaleido-RCP2, you must validate your access to the Kaleido system. Press the
LOGIN key, and select the appropriate position that corresponds to the type of user you are.
22