Table of Contents
Advertisement
Kaleido-RCP2
Firmware Selection (Step 1 of 3)
Kaleido-RCP2 Updater utility, is available on the Kaleido-X Upgrade DVD, and from the
Downloads section of Grass Valley's website.
To determine if you need to update your Kaleido-RCP2, check its firmware version (refer to
the diagram under Configuration Menu), and compare it with the version of the firmware
update file indicated under Software and Firmware, in the Kaleido-X Release Notes.
The Kaleido-RCP2 firmware can be updated over the Ethernet connection, and this may
take as long as 15 minutes to complete. The Kaleido-RCP2 Updater window includes step
by-step instructions:
Firmware Selection (Step 1 of 3)
Make sure you fulfill the following conditions before beginning this procedure:
• You have a PC connected to the same subnetwork as your Kaleido-RCP2 unit.
• A copy of the Kaleido-RCP2 Updater utility is on the PC.
• A copy of the Kaleido-RCP2 firmware update file is on the PC.
To prepare the firmware update:
1 Open the Kaleido-RCP2 Updater utility from a PC located on the same network as the
Kaleido-RCP2 you wish to update.
2 Type the name of the firmware data file you wish to use to upgrade your RCP2 unit in
the Firmware data file box. Alternatively, click Browse to locate the appropriate file:
3 Click Next.
20
Advertisement
Table of Contents
