GRASS VALLEY KALEIDO-RCP2 Installation And Operation Manual page 23

You may require a password to log on. A room is supposed to be already set through the
configuration menu of the device.
Here is a graphical summary of the login menu as it appears on the Kaleido-RCP2's LCD
display:
Login
To display the login
menu, on the LCD, press
the LOGIN key. Then,
you can access any
submenu, or select
values, by pressing
ENTER. Press ESC to
cancel a selection, or to
return to the previous
menu level. Press 8 to
navigate from one menu
option to the next. Press
2 to go back to the
previous option.
The following table shows how to change the login position. As an example, the position
will be changed from TD01 to TC01. To accomplish this task, you must have first selected a
room (see Selecting a Room).
Action
Press LOGIN.
LOGIN Position
The available login
positions depend on the
room you selected from
the Configuration
menu. Scroll up and
down the list, by pressing
the 8 and 2 buttons.
LCD indication
Until the unit receives the
list of login positions from
the Kaleido system:
Acquiring login list...
Once the list of login
positions is available:
LOGIN Position
[first list item]
If the list of login position is
not available, the following
message displays for 3
seconds:
No login list available
If the Kaleido system is not
active, the following
message displays for 3
seconds:
Target system is offline
Kaleido-RCP2
Installation and Operation Manual
Enter password:
The password can
include up to 8
digits, that you can
type by pressing the
digit buttons on the
keypad. If you make
an error, press DEL
and type the
password again.
When you are done
press ENTER to
validate the
password.
Other buttons
Lit (depending on the
Kaleido system's
configuration)
Digit keys 2 and 8 are
lit to indicate that they
can be used to scroll
the list
Lit (depending on the
Kaleido system's
configuration)
Dimmed (depending
on the Kaleido system's
configuration)
23