Scope Of Supply; Kits; Software And Accessories; Service And Support - Danfoss TFX Installation And Operation Manual

1.2.2 Scope of supply

> TFX
> Product information sheet with SIMPLIFIED EU
DECLARATION OF CONFORMITY

1.2.3 Kits

The kits listed contain all hardware components required for
putting into operation.
Before you can use the data platform, you must obtain
corresponding access. The setup of the new account for the
data platform is included in the STARTER KIT.
Table 2: Required hardware components for
TFX operation
Model Material
TFX
Starter cable for device setup
TFX support tool
USB cable (TFX support tool)
CAN-Bus termination resistor 120Ω
Power supply with changeable plugs
(US, EU, UK, AU)
USB cable (bootloader / rmware-
update)
USB cable (debugging / diagnosis)
Mounting kit M5
Antenna LTE GNSS DA 3M0 FAKRA-D
FAKRA-C FA
Order number for HARDWARE KIT 102EC77300A
Order number for STARTER KIT
INFORMATION
The HARDWARE KIT only includes the TFX and mounting
accessories. We recommend that customers without an
existing user account at the Data platform should order the
STARTER KIT. The STARTER KIT includes the hardware and
the initial account setup at the Data platform.
Internal External
Antenna Antenna
102EC77301A
102EC77302A 102EC77302A
TFX INSTALLATION AND OPERATION MANUAL

1.2.4 Software and accessories

The software can be located at:
SOFTWARE

Table 3: Required software for TFX operation

Software
EATON Con gurator
PROEMION Dashboard
PROEMION Firmware Programmer
PROEMION PDC Builder
ACCESSORIES

Table 4: TFX available accessories

Accessories / description
TFX SERVICE TOOL
CAN-PC gateway for con guration and
test purposes
TFX EXTERNAL ANTENNA

1.3 Service and support

For more information, go to our website at:
6046279-001 March 2020
About the device
Part number
Eaton Installer Package
PROEMION Tools CD
PROEMION Tools CD
PROEMION Tools CD
Part number
102EC99110A
102EC99111A
3