Can; Firmware Update; Data Platform - Danfoss TFX Installation And Operation Manual

Operation
10. Click on the YES button.
The con guration update download starts
automatically as soon as the device is online. The
download can take several minutes.
The device recognizes the con guration le and
saves it to its internal memory.
The device LEDs light up in a certain sequence.
INFORMATION
For more information on the LED status indications, see
chapter Indicator elements (LED).
11. In the S > GSM I
TATUS
version and the
DOD DOD
12. In the S > D
ERVI CE EVI CE
, check the protocol (update log) for the
PORTAL
corresponding machine.
The protocol contains important information regarding the
update procedure.
Example of protocol content after a successful update:
> <BEGIN>: 1534329309
> <actSW>: Fw 6.1.0.0 Release
> <actBL>: Bl 9.1
> <actDOD>: PROEMION
> File Size: 1132
> Received con guration le
> CONFIGURATION DOWNLOAD COMPLETE
> <newSW>: Fw 6.1.0.0 Release
> <newBL>: Bl 9.1
> <newDOD>: CANlink mobile 3337 Demo V1
> <END>: 1534329325
Example of protocol content after a failed update (e.g. due
to an incompatible model):
> <BEGIN>: 1534329785
> <actSW>: Fw 6.1.0.0 Release
> <actBL>: Bl 9.1
36
TFX INSTALLATION AND OPERATION MANUAL
area of the , check the
NFO PORTAL
activation time.
> D F area of the
OWNLOA D ILE
> <actDOD>: CANlink mobile 3337 Demo V1
> File Size: 1112
> Received con guration le
> Job 0 (0x1018:0x2) - ERROR: 0x3337 is not equal to
0xTFX Internal Antenna
> ABORT CONFIGURATION DOWNLOAD ON ERROR!
> <newSW>: Fw 6.1.0.0 Release
> <newBL>: Bl 9.1
> <newDOD>: CANlink mobile 3337 Demo V1
> <END>: 1534329798

5.8.2 CAN

You can perform a con guration update using the
CAN interface.
To be able to load the con guration le to the device, the
device must be connected via a CAN-USB port to a PC on
which the con guration le is saved.
NOTICE
Risk of property damage
Pay attention that the USB plug is correctly aligned to the
USB port on the computer before being plugged in and that
it is plugged in without using excessive force. Incorrect
alignment during connection or the use of excessive force
could cause damage to the USB port.
1. Connect the device to a PC. See chapter Connecting
the device to the PC
2. Load the con guration to the device. See chapter
Loading the con guration to the device.
You have completed the con guration update.

5.9 Firmware update

You can load a rmware update to the device by remote
maintenance via the Data platform, via the CAN interface, or
via the micro-USB interface (type A).
NOTICE
Perform a node scan in DANFOSS Con gurator to read out the
currently installed rmware version. See chapter Node scan.
Download the rmware from our website:

5.9.1 Data platform

To be able to upload the rmware update (*.FwBin) to
the device remotely via the Data platform, PROEMION
Firmware Programmer must be installed on a PC and the
rmware update le must be stored.
6046279-001 March 2020