Con Guration Update; Data Platform - Danfoss TFX Installation And Operation Manual

The le has the following structure:
> Unix timestamp indicating when the value was read out
(only once per transmission)
> The line starts with a colon (:)
> Object index (e.g. 0x3333)
> Comma (,)
> Sub-Index (e.g. 0x38)
> Comma (,)
> Read-o value in decimal or text form
> Semicolon (;)
> End of line <CR><LF>
If the le is not removed from the server, lines are added
to the existing le when the next instruction to read
is received. The timestamp then provides a distinction
between the read instructions.
Example:
UTC:1430123506
: 0x3333, 0x38, 60;

5.8 Con guration update

Use DANFOSS Con gurator to load a con guration update to
the device.
The con guration update can be loaded to the device via
the CAN interface or the Data platform. The device identi es
and automatically loads the new con guration.
For more detailed information on creating a con guration,
see chapter Customizing the demo con guration le.

5.8.1 Data platform

Authorization to perform a con guration update must be
registered on the Data platform. Generally, users with
administrator rights have this authorization.
INFORMATION
If you do not have authorization to perform a con guration
update, contact the service support. See chapter Service
and support.
1. Start the DANFOSS Con gurator software.
2. Open the corresponding con guration le (.DOD).
3. Click on T D
ARGET EVI CE
R D - A
EMOTE OWNLOA D LL
the toolbar next to the symbol
> O D > D
B JE CT ICTIONARY OWNLOA D
E or click on the arrow in
NTRIES
D E
OWNLOA D ALL
TFX INSTALLATION AND OPERATION MANUAL
The window R
opens.
4. In the window
T (S ), click on the S
ARGET
The window S
5. Enter your PROEMION user name and password in
the S
ELE CT
6. Click on the L
7. Select the device. The device does not have to
be online.
8. Click on the OK button.
Loss of connection due to incorrect parameters.
The online connection may be lost due to incorrect provider
parameters. In most cases, it is not necessary to update the
>
security variables, so this should be avoided.
Before each update of the security variables, check the
.
•
NTRIES
provider parameters.
9. In the window R
( ), click on the S
TARGET S
The following warning appears.
You are warned against downloading untested
con guration les.
6046279-001
EMOTE CONFIGURATION DOWNLOA D TO TARGET
R C
EMOTE ONFIGURATION
D
ELE CT EVI CES
D opens.
ELE CT EVI CES
D window.
EVI CES
button.
OGIN
NOTICE
EMOTE CONFIGURATION
button.
TART
March 2020
Operation
(S )
D
OWNLOA D TO
button.
DOWNLOA D TO
35