Usb Connector Cable ( Rmware Update) - Danfoss TFX Installation And Operation Manual

Power connector, low voltage coupling
Pin Designation
1 Terminal 31 / ground
2 Terminal 30 / VCC
Start cable for main plug connector, power supply cable
D-sub connector, female, 9-pin (CAN1)
Pin Designation
1 not assigned
2 CAN1-Low
3 not assigned
4 not assigned
5 not assigned
6 Terminal 31 / ground
7 CAN1-High
8 not assigned
9 Terminal 30 / VCC
Start cable for main plug connector, D-sub connector (CAN1)
The connector D-sub connector (CAN1) also features a slide
switch for a factory reset.
INFORMATION
For more information on how to perform a factory reset,
see chapter Factory reset via the start cable.
Color Description
Green Power supply
White Power supply
Color Description
- -
Brown-green CAN, bidirectional
- -
- -
- -
Green -
White-green CAN, bidirectional
- -
White Power supply
TFX INSTALLATION AND OPERATION MANUAL
D-sub connector, female, 9-pin (CAN2)
Pin Designation
1 not assigned
2 CAN2-Low
3 not assigned
4 not assigned
5 not assigned
6 CAN2-GND
7 CAN2-High
8 not assigned
9 not assigned
Start cable for main plug connector, D-sub connector (CAN2)

3.4.2 USB connector cable ( rmware update)

The USB cable, USB A-micro to USB-A, 1.8-2m is intended
for rmware or bootloader updates and has the following
connectors:
> 1 micro-USB-A, male
> 1 USB-A, male
Micro-USB-A connector, male
Pin Designation
1 VBUS
2 D-
3 D+
4 ID
5 Ground
USB cable, USB A-micro USB A, 1.8-2 m, micro-USB-A, male
6046279-001 March 2020
Functionality and features
Color Description
- -
Red-blue CAN, bidirectional
- -
- -
- -
Violet -
Gray-pink CAN, bidirectional
- -
- -
Description
USB power supply
Bidirectional
Bidirectional
Ground, output
USB power supply
11