Usb Connector Cable (Diagnosis) - Danfoss TFX Installation And Operation Manual

Functionality and features
USB-A connector, male
Pin Designation
1 VBUS
2 D-
3 D+
4 Ground
USB cable, USB A-micro USB A, 1.8-2 m, USB-A, male
NOTICE
If you start the device with a connected USB-cable, USB
A-micro USB A, 1.8 - 2 m, neither of the two LEDs on the
device light up.
INFORMATION
With the micro-USB type-A cable, the pin ID is drawn to
GND when the device is switched on. This activates the
MCU-internal bootloader.

3.4.3 USB connector cable (diagnosis)

The USB cable, USB-A on micro-USB-B, 1.6 m (included in
Starter Kit) is intended for debugging and for diagnosis of
the device. It has the following connectors:
> 1 micro-USB-B, male
> 1 USB-A, male
Micro-USB-B connector, male
Pin Designation
1 VBUS
2 D-
3 D+
4 ID
5 Ground
USB cable, USB-A on micro-USB-B, 1.6 m, micro-USB-B, male
12
TFX INSTALLATION AND OPERATION MANUAL
Description
USB power supply
Bidirectional
Bidirectional
USB power supply
Description
USB power supply
Bidirectional
Bidirectional
Output (ID is unde ned)
USB power supply
USB-A connector, male
Pin Designation
1 VBUS
2 D-
3 D+
4 Ground
USB cable, USB-A on micro-USB-B, 1.6 m, micro-USB-A, male
6046279-001 March 2020
Description
USB power supply
Bidirectional
Bidirectional
USB power supply