Evaluating Logged Data On The Data Platform - Danfoss TFX Installation And Operation Manual

1. Start the DANFOSS Con gurator software.
2. Choose F > O from the menu.
ILE PEN
3. Open the con guration le you want.
4. Create an O M
PERATION
dictionary group.
5. Create an object A
CTION
O M object dictionary group.
PERATION ANAGER
6. Select the B tab.
ASI C
7. Enter a value in milliseconds in the eld
W . This value determines the
ILL B E CHE CKE D EVERY
intervals at which the variables are logged.
8. Check the A
LWAYS ACTIVE
irrespective of conditions. Alternatively, you can
de ne conditions for logging.
9. Click on the SAVE button.
10. Select the JOBS tab.
11. In the O eld, click on the
VERVIEW
The C J window opens.
REATE NEW OB
12. Select the job type L
OGGING
13. Click on the OK button.
The job is added to the
object
ANAGER
- F - O 1 in the
UN CTION PERATION
T
HIS OPERATION
box. Logging takes place
A button.
DD
.
O list.
VERVIEW
TFX INSTALLATION AND OPERATION MANUAL
14. In the C ID eld, enter the
OB
CAN message. The ID must not be used by other
CAN messages.
15. In the A N R
DD EW OW
the variable.
16. In the J P
OB ARAMETER
The selected variable is added to the
P list.
ARAMETER
17. Add further variables as required.
18. Click on F > S in the menu.
ILE AVE
You have completed the con guration for logging
internal variables.

5.2.6 Evaluating logged data on the data platform

WRITING A PARSING CONFIGURATION FILE (PDC) AND
ASSIGNING IT TO A MACHINE
In order to be able to evaluate the logged messages and
display the signals on the data platform, you must create
an additional con guration le (PDC le) and assign it to the
device on the data platform.
To nd out how to create a PDC le, see the
"PDC Documentation" .
6046279-001 March 2020
Operation
ID (hex) for the virtual
eld, select the variable type and
eld, click on the A button.
DD
J
OB
29