U
G
( M
S E R
U I D E
A C H I N E
Machine Clock/Timers Setting
Time Zone
Daylight Savings
4 – 8
A
)
D M I N I S T R A T O R
This setting allows you to set the time and date. You can also
determine the duration of time until the Power Saver Mode or
reset functions engage.
Machine Clock/Timers allows you to set the following items.
Date
Sets the Date (Year/month/day) of the machine's system clock to:
•
Year - 2000 to 2099
•
Month - 1 to 12
•
Day - 1 to 31
The date set here is printed on lists and reports. The default is
2001, January 1.
Time
Sets the system clock time (H / M) by 12-hour system display or
24-hour system display.
•
Hour - 0~23 (24-hour system) OR 1~12 (12-hour system)
•
Minute - 0~59.
•
Set AM or PM if it is a 12-hour system display.
The time set here will be printed on lists and reports. The default is
12-hour system display, 0:00 AM.
Sets the time zone that you are in. Use the up and down arrow
buttons to select the desired time zone.
Sets whether or not to apply daylight savings to the system clock
time.
•
Adjust Off
•
Adjust On