Power Saver Mode; Exiting The Power Saver Mode; Quick Start Guide To Copying - Xerox DocuColor 2240 User Manual

U G ( C
S E R U I D E O P I E R

Power Saver Mode

Quick Start Guide to Copying

1 – 1 0
)
Power Saver Mode automatically cuts off the electricity to the
machine if it is left unused for a certain duration. The Power Saver
feature has two modes, a Low Power mode and Sleep mode. The
machine enters the Low Power mode after the preset time has
elapsed if the machine is left unused for a fixed period of time.
The machine then enters the Sleep mode if a further preset time
elapses.
• Low Power mode
In this mode, the power to the control panel and fuser unit is
lowered to save power. The display goes out, and the Power
Saver button on the control panel lights. To use the machine,
press the Power Saver button. Power Saver goes out to
indicate that the Power Saver feature is canceled. The default
is 15 minutes.
• Sleep mode
In this mode, the power is lowered more than in the Low
Power mode. The display goes out, and the Power Saver
button on the control panel lights. To use the machine, press
the Power Saver button. Power Saver goes out to indicate that
the Power Saver feature is canceled. The Sleep mode default
is 45 minutes after Low Power mode is engaged.
For more information on setting Power Saver mode timers, refer to
the User Guide (Machine Administrator).

Exiting the Power Saver Mode

The Power Saver mode can be exited in two ways:
• By pressing the Power Saver button
• By receiving a print job
This section will lead you quickly through a number of features
and steps used in making copies.
For more information about copy features, refer to the section
entitled Making Copies, in this chapter.