Xerox DocuColor 2240 User Manual page 190

U G ( P )
S E R U I D E R I N T
Bypass Feed Orientation
Print Mode
Output Color
RGB Color Correction
RGB Gamma Correction
Screen
Image Enhancement
Draft Mode
Gray Guaranteed
Stapling
2 – 4 6
Specify the paper orientation when printing from the bypass tray.
When you set the short side of the paper in the bypass tray feed
direction, select Landscape setting. When you set the long side of
the paper in the bypass tray, select Portrait setting.
Specify whether you want High Speed, Standard, or High Quality
for printing. For more information on setting the Print Mode, refer
to the C.) Special Printing section in the User Guide (Print).
Specify your output printing options select either Color or Black.
Specify the coloration of the RBG Color Correction.
Normal: This setting is optimized for printing documents that
contain text and graphics, such as business documents.
Photo: This setting is optimized for printing photos or images with
gradations. Select this setting when printing images in RBG.
Web Pages: This setting is optimized for printing web pages.
Presentation: This setting is optimized for printing the color
documents vividly, such as presentation documents.
Specify the brightness of the documents. The higher the value, the
darker the print becomes.
You can adjust the image quality. Select Gradation to print photos
and gradations clearly. Select Fineness to print the colors in
illustrations, tables, or graphs evenly.
Specify whether to use the Image Enhancement function.
Selecting On smooths out the boundaries between black and
white when printing. This reduces jagged edges, thereby
artificially increasing the resolution of the image. When printing an
image (bitmap) composed of coarse halftone dots, smooth color
gradation is impossible in certain situations. In this case, select
Off.
Specify whether to reduce the amount of toner used when printing
drafts. When you select On, the overall printed color becomes
lighter. This is best for printing documents when print quality is not
necessary.
Select On to print documents in black only. This feature does not
apply to images of the documents.
Select whether to staple printed documents as well as the position
of the staple.
• You can staple 2 to 30 sheets.
• You can only staple when Finisher Tray is selected for
Output Destination in the Advanced Options tab.
• You cannot use staples when Job Offset is selected.