When Using Adobe Illustrator - Brother GTX600NB Instruction Manual

4-3-3. When using Adobe Illustrator

In Illustrator, perform the required procedures mentioned below:

Color setting

Open a new file
As required, perform the following procedures:

Create print data (ARX6 file).

Use the color palette in Useful Tools.
<TIPS>

Take one of the actions mentioned below, in order to avoid such troubles that no image data is inserted into the print range or part
of image data is cut off.
- Before start-up, specify the PC's default printer as the "Brother GTX-6" or the "Brother GTX-6 FileOutput".
- Use the "Brother GTX-6 FileOutput" printer driver to output a file, then display and check the print preview.

For an image created in CMYK color mode, load the image into Photoshop, select [Image] > [Mode] in the menu bar, and change
the color to the RGB color (sRGB). In order to edit an image, load the image into Photoshop, edit it in the form of bitmap data, or
edit it by means of image quality improvements in the printer driver.
・In the case of print data using white ink ☞"4-4-10. Set up the image quality >>P.4-36"
・In the case of print data using color ink and black ink only ☞"4-5-6. Set up the image quality >>P.4-46"

For this printer, it is recommended to use Illustrator CC. The display screen is described in Illustrator CC.
4-16
Creating print data