Brother GTX600NB Instruction Manual page 4

SAFETY INSTRUCTIONS
WARNING
Basic precautions
This printer should only be used by operators who are appropriately trained in its safe operation.
The printer is not suitable for use in places where children are present.
To prevent accidents and problems, do not modify the machine by yourself. Brother will not be held
responsible for any accidents or problems resulting from modifications made to the machine.
Do not handle the power cord with wet hands. Otherwise, it may cause electric shocks.
Installation
Do not set up the printer in a dusty environment. If dust collects inside the printer, it may cause fire or electric
shocks or problems with correct operation.
Be sure to connect the ground. If the ground connection is not secure, you run a high risk of receiving a
serious electric shock, and problems with correct operation may also occur.
Do not bend the cords excessively or fasten them too hard with staples or anything similar to secure cords.
Otherwise, it may cause fire or electric shocks.
Do not connect power to the printer on the floor near the printer. Otherwise, it may cause a fire, electric
shock, or malfunction if water drips from the printer.
4