Brother GTX600NB Instruction Manual page 275

Error code Error message
1033 [W Head Temp Rising]
1034 [W Head Temp Rising]
1060 [Temp Low]
1061 [Temp High]
1064 [Humidity too Low]
1065 [Humidity too High]
[Battery Needs to Be
1070
Replaced]
1080 [Please Adjust RTC]
1085 [Please Adjust RTC]
[Clean nozzle guard and
1090
cap]
[Clean nozzle guard and
1091
cap]
1210 [Exhaust Fan Stop]
1211 [Exhaust Fan Stop]
1300 [Replace cap foam]
1301 [Replace cap foam]
1320 [Replace carriage foam]
1321 [Replace carriage foam]
1340 [Replace wiper]
1341 [Replace wiper]
Description
The temperature of white
head A is rising.
The temperature of white
head B is rising.
The ambient temperature is
lower than the scope covered
by its warranty for the best
print result.
The ambient temperature is
higher than the scope
covered by its warranty for
the best print result.
The humidity is lower than
the scope covered by its
warranty for the best print
result.
The humidity is higher than
the scope covered by its
warranty for the best print
result.
It is time to replace the
battery on the main board.
The built-in clock has not
been set up.
The built-in clock has not
been set up.
The cap needs to be
cleaned.
The cap needs to be
cleaned.
The mist collection fan (right
side) is not working.
The mist collection fan (left
side) is not working.
The cap foam needs to be
replaced.
The cap foam needs to be
replaced.
The carriage foam needs to
be replaced.
The carriage foam needs to
be replaced.
The wiper needs to be
replaced.
The wiper needs to be
replaced.
9-4
Remedy
Please wait until the temperature decreases.
If the problem persists, please contact your
dealer.
Please wait until the temperature decreases.
If the problem persists, please contact your
dealer.
Raise your room temperature.
Lower your room temperature.
Turn on the humidification function and wait for
a while.
Lower your room humidity.
Note the error code and error message, and
notify your dealer.
Note the error code and error message, and
notify your dealer.
Note the error code and error message, and
notify your dealer.
Select the [Clean nozzle guard and cap] menu
item to perform cleaning.
Select the [Clean nozzle guard and cap] menu
item to perform cleaning.
Note the error code and error message, and
notify your dealer.
Note the error code and error message, and
notify your dealer.
Select the [Replace maintenance unit parts]
menu item and replace the cap foam.
Select the [Replace maintenance unit parts]
menu item and replace the cap foam.
Select the [Replace maintenance unit parts]
menu item and replace the carriage foam.
Select the [Replace maintenance unit parts]
menu item and replace the carriage foam.
Select the [Replace maintenance unit parts]
menu item and replace the wiper.
Select the [Replace maintenance unit parts]
menu item and replace the wiper.
Error message