Brother GTX600NB Instruction Manual page 156

(4) For the print data that requires multiple cycles of platen reciprocate movement, print data of each layer can be
verified separately by selecting the desired layer to be displayed. From the [Present Layer], select a layer that you
want to bring into the view.
<TIPS>

In the layer that is shown as [Total], the preview window of the final print result is displayed.

When the [White Data] checkbox is marked, the preview window for white ink only will be displayed.
(5) Check the printing conditions and preview window, and click on [Send to Printer].
Then, the ARX6 file is sent to the printer.
<TIPS>

Make sure that the PC and printer are connected via a LAN cable.

In the event that two or more GTX-6 printer drivers have been installed on your PC, select one of them as the destination of
data transmission and click [OK].
5-23
Basic printing procedures