Brother GTX600NB Instruction Manual page 37

1st layer
[Nozzle Check CMYK]
[Test Print]
[Nozzle Check White]
[Black]
[Yellow]
[Cyan]
[Ink refill]
[Magenta]
[White]
[Cleaning solution]
[Print Data Load]
[Receiving History]
[Maintenance Part
Clean/Replace]
[White Ink Circulation]
[White Ink Tank Agitation]
[Humidification]
[Humidifier Water Replacement]
[Humidifier Initial Water Supply]
[Waste Ink Tank Disposal]
[Humidifier Drain Tank Disposal]
[Maintenance]
[Tank remaining volume sensor
correction]
[Wiper Cleaning Tank Operation]
[Head Replacement]
[Install Ink after Replacing Head]
[Initial Ink Installation]
[Tube air bleed]
[Cap pump check]
[Log copy to USB]
2nd layer
This is the test pattern to check to see if ink-jet droplets are
ejected from the color heads properly or not.
This is the test pattern to check to see if ink-jet droplets are
ejected from the white head(s) properly or not.
Use when refilling the ink.
Any print data stored in a USB flash memory (ARX6, ARXP,
or ARX4 file) is loaded into the system with this menu item.
By selecting this menu item, you can display any print data
received in the order in which they are sorted from the
newest to the oldest ones, and you can select any one of
them.
Use when performing printer maintenance.
2-3
Description
Menu list