Brother GTX600NB Instruction Manual page 193

<CAUTION>

Be sure to use a clean waste cloth. Using a waste cloth with pretreatment may lead to non-ejection.

Do not rub the parts strongly. Doing so may damage the parts.

Wipe in the direction of the arrow to prevent the peeled ink waste from entering the flushing foam and the wiper cleaning
solution tank.
<TIPS>

If it is difficult to remove the ink built up, clean it with the cleaning solution for GTX-6 (GCX-6W09L/GCX-6W18L).
When doing so, do not apply the cleaning solution directly to the top surface of the steel plate, but rather use a waste cloth
soaked with the cleaning solution.
On the
color side
On the
white side
Precautions to keep good printing quality/use printer over the long term
Pre-cleaning state
6-25
Post-cleaning state