Brother GTX600NB Instruction Manual page 285

Error code Error message
5222 [Machine Error]
5223 [Machine Error]
5224 [Machine Error]
5229 [Machine Error]
5600 [Machine Error]
5601 [Machine Error]
5602 [Machine Error]
6004 [Machine Error]
6006 [Machine Error]
6007 [Machine Error]
6008 [Machine Error]
6010 [Machine Error]
Description
An error has been detected
when the color 2 suction
pump of the maintenance
unit was operated.
An error has been detected
when the white 1 suction
pump of the maintenance
unit was operated.
An error has been detected
when the white 2 suction
pump of the maintenance
unit was operated.
An error has been detected
while checking the operation
of the suction pump of the
maintenance unit.
An error has been detected
during IC stick control.
An error has been detected
during IC stick control.
An error has been detected
during IC stick control.
An error in the platen
obstacle sensor has been
detected.
The platen motor stopped
abnormally.
An error has been detected
while checking the
mechanism for loading and
unloading the platen.
An error has been detected
while checking the
mechanism for raising and
lowering the platen.
An error has been detected
when writing to the EEPROM
on the main board.
9-14
Remedy
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
Check that the IC stick is inserted correctly.
If the problem persists even after reactivating
the printer, please contact your dealer.
Check that the IC stick is inserted correctly.
If the problem persists even after reactivating
the printer, please contact your dealer.
Check that the IC stick is inserted correctly.
If the problem persists even after reactivating
the printer, please contact your dealer.
Check to see if the obstacle sensor is covered
with something.
If the problem persists even after reactivating
the printer, please contact your dealer.
Check and see if any source produces a loud
noise near the printer.
Restart the printer, and from the menu, select
[Printer Setting] > [Platen settings] > [Platen
Break-in Run]. If the problem persists after three
platen break-in runs, please contact your dealer.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
Error message