Brother GTX600NB Instruction Manual page 52

(7) In the [Hostname or IP address] field, enter the already-setup static IP address of the printer, make sure that [Query
the printer and automatically select the driver to use] is checked, and click [Next]. (One instance of each value is
cited as shown in the window below.)
<TIPS>

You can omit steps (8) through (13) if the printer driver to use is automatically selected. Follow the steps if it cannot be
selected automatically.

If you set the printer's IP address by automatic acquisition, you must check the IP address of the printer in advance. You
can confirm the IP address by selecting [Confirm network setting] -> [IP Address] from the menu. ☞"7-22. Confirm network
setting >>P.7-17"

If you are using a DNS server, you can use a host name and domain name instead of the IP address. Enter the host name
of your choice. ☞"7-22. Confirm network setting >>P.7-17" As for the domain name, check with your network administrator.
(8) Then, the detection window of TCP/IP port appears, and the current window will automatically go to the additional
port information window after the detection is completed.
(9) After the window shown below appears, select the [Custom] in the [Device Type], and click [Settings].
3-14
Installation and preparation