Brother GTX600NB Instruction Manual page 281

Error code Error message
3401 [PC Data Error]
3402 [PC Data Error]
3407 [No Data in Print File]
3408 [PC Data Error (too large)]
3410 [PC Data Error]
3411 [PC Data Error]
3412 [PC Data Error]
[USB flash drive Access
4100
Error]
Description
Abnormal data has been
received from the PC.
Abnormal data has been
received from the PC.
Print data with no images
contained has been received
from the PC.
Abnormal data has been
received from the PC.
Abnormal data has been
received from the PC.
Abnormal data has been
received from the PC.
Abnormal data has been
received from the PC.
The file in the USB flash
memory is not accessible.
9-10
Remedy
Check on the ARX6 file by means of "GTX-6
File Viewer".
Create the print data once again.
If the problem persists, please contact your
dealer.
Check on the ARX6 file by means of "GTX-6
File Viewer".
Create the print data once again.
If the problem persists, please contact your
dealer.
Check on the ARX6 file by means of "GTX-6
File Viewer".
For example, please confirm the print range and
paper size for your software application through
the Print Preview function, etc. of Photoshop.
Note the error code and error message, and
notify your dealer.
Check on the ARX6 file by means of "GTX-6
File Viewer".
Make sure that your PC is connected to the
printer, and start communication between your
PC and the printer once again.
Restart your PC and the printer.
If the problem persists, please contact your
dealer.
Check on the ARX6 file by means of "GTX-6
File Viewer".
Make sure that your PC is connected to the
printer, and start communication between your
PC and the printer once again.
Restart your PC and the printer.
If the problem persists, please contact your
dealer.
Check on the ARX6 file by means of "GTX-6
File Viewer".
Make sure that your PC is connected to the
printer, and start communication between your
PC and the printer once again.
Restart your PC and the printer.
If the problem persists, please contact your
dealer.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
Error message