Brother GTX600NB Instruction Manual page 263

The cleaning solution is leaked from the cleaning solution tank
Probable Cause
Is the main body of printer put
aslant?
Takes longer print time than before
Probable Cause
Is the ambient temperature
under 18°C (64.4°F)?
Is your printing under a low
humidity environment?
Remedy
Place the printer horizontally.
If the problem is still not remedied, please
contact your dealer.
Remedy
Adjust the room temperature to 18°C (64.4°F) or
more.
If it is difficult to adjust the room temperature, set
the operational configuration under low
temperature to [Disable].
Wait for the humidity inside the printer to reach
50% or higher.
8-12
Troubleshooting
Reference
"3-1. Installation of printer
>>P.3-2"
Reference
"7-10. Print Operation Settings
Under Low Temperature
>>P.7-8"
-