Brother GTX600NB Instruction Manual page 23

No. Name
1 Top cover
2 Carriage
Obstacle sensor
3
"Platen too low" sensor
4 Platen sheet
5 Platen
6 Shoulder bar
7 T-shirt tray
8 Platen fixing handle
9 Mist fan filter
10 Operation panel
11 Print button
12 Stop button
13 Monitor mounting frame
Open this cover when cleaning the internal area of the printer.
Holds the print head.
Checks the presence of any obstacles by their height (such as wrinkled T-shirt)
that are within range to collide with the print head.
Make sure that the clearance between the head and platen is not too large.
It helps to keep the T-shirt from moving/shifting during printing so that an image
can be clearly printed.
Set the T-shirt to be printed.
Align the position of a T-shirt with this bar.
This T-shirt tray holds such portions of T-shirt that droop down on it and feeds
the entire T-shirt into the printer.
Use this handle to secure the platen in place.
Tighten or loosen it when attaching/removing the platen. Keep it tightened
when printing.
It absorbs ink mist which is generated inside the printer on its surface.
Operate the printer using this panel.
There is no print data when this button remains off. This button blinks during
reception of print data, and it illuminates when such reception is completed.
Printing will begin if you press this button when it is illuminated.
Press either one to cancel operations, such as printing and platen movement.
Printer will come to a stop after necessary actions for keeping the printer's good
quality, such as retracting operation of print heads and capping operation, are
completed.
You can mount the monitor by using the monitor arm.
1-9
Before Using Your Printer for the First Time
Function