Brother GTX600NB Instruction Manual page 282

Error code Error message
[USB flash drive Access
4101
Error]
[USB flash drive Access
4103
Error]
[USB flash drive Access
4104
Error]
[USB flash drive Access
4105
Error]
4106 [Illegal Format]
[USB flash drive Access
4108
Error]
4200 [Machine Error]
4201 [Machine Error]
4202 [Machine Error]
Description
File creation is not possible in
USB flash memory.
The file in the USB flash
memory is not accessible.
The file in the USB flash
memory is not readable.
The file in the USB flash
memory is not writable.
The file in the USB flash
memory is not accessible.
The file in the USB flash
memory is not readable.
An error has been detected
in the display data on the
LCD screen.
An error has been detected
in the display data on the
LCD screen.
An error has been detected
in the display data on the
LCD screen.
9-11
Remedy
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
In the event that this error is displayed after
suspending the updating of firmware, please
start the updating operation over from the
beginning.
If the problem persists, please contact your
dealer.
In the event that this error is displayed after
suspending the updating of firmware, please
start the updating operation over from the
beginning.
If the problem persists, please contact your
dealer.
In the event that this error is displayed after
suspending the updating of firmware, please
start the updating operation over from the
beginning.
If the problem persists, please contact your
dealer.
Error message