Adobe Illustrator - Brother GTX-4 Instruction Manual

5-4-3. Adobe Illustrator

In Illustrator, perform the required procedures mentioned below:

Color setting

Open a new file
As required, perform the following procedures:

Create print data (ARX4 file)

What to do when using the color palette in Useful Tools
<TIPS>

Take one of the actions mentioned below, in order to avoid such troubles that no image data is inserted into the print range or part
of image data is cut off.
- Before start-up, specify the PC's default printer as the "Brother GTX-4" or the "Brother GTX-4 FileOutput".
- Use the "Brother GTX-4 FileOutput" printer driver to output a file, then display and check the print preview.

For an image created in CMYK color mode, load the image into Photoshop, select [Image] > [Mode] in the menu bar, and change
the color to the RGB color (sRGB). In order to edit an image, load the image into the Photoshop, edit it in the form of bitmap data,
or edit it by means of the image quality improvement of printer driver (Refer to "5-5-8. For other applications: Color Processing
>>P.116").

For this printer, it is recommended to use Illustrator CS6/CC. The display screen is described in Illustrator CC.
96
Creating print data