Brother GTX600NB Instruction Manual page 5

SAFETY INSTRUCTIONS
WARNING
Printing
If a foreign object gets inside the printer, immediately turn off the power, disconnect the power cord, and
contact the place of purchase or a qualified technician. If you continue to use the printer while there is a
foreign object inside, it may result in fire or electric shocks or problems with correct operation.
Do not allow the printer to come into contact with liquids. Otherwise, it may cause fire or electric shocks or
problems with correct operation.
If any liquid gets inside the printer, immediately turn off the power, disconnect the power cord, and contact
the place of purchase or a qualified technician.
Do not use the printer when smoke or a bad odor is coming from the printer. Otherwise, it may cause fire or
electric shocks or problems with correct operation. Immediately turn off the power, disconnect the power
cord, and contact the place of purchase or a qualified technician.
Keep your finger or any body part away from the rotating fan. Otherwise, it will be caught up, which results in
injuries.
Turn off the power when you approach the fan.
CAUTION
Environmental requirements
Use the printer in a place which is adequately ventilated. A slight odor is generated when the printed articles
are being fixed by heat.
Installation
The printer machine weighs 730 kg (1609 lb). Transporting and setting up of the printer should be held in the
proper way. Otherwise, the printer may topple over and cause injury.
Unplug the printer and contact the dealer where you purchased the printer or a trained technician if the
printer topples over. If you continue to use it, it may result in fire or electric shocks or poor printing quality.
Do not set up the printer in a place where it will be affected by vibration. Otherwise the printing quality may be
degraded or the printer may topple over, which causes injury or results in failure of the printer.
Do not connect the power cord until installation is complete. The printer may operate if the power is turned on
by mistake, which could result in injury.
Do not climb onto the printer or place heavy objects on top of it. You may get injured if it becomes
unbalanced and tips over.
5