Skoda Karoq 2018 Workshop Manual page 274

Karoq 2018 ➤ , Kodiaq 2017 ➤
1.6/85; 2.0/110; 130; 140 kW TDI CR engine - Edition 06.2017
Exhaust gas turbocharger - tightening torque and tightening order
– Tighten screws in steps in the specified sequence:
Stage Bolts
1. -Arrows-
2. -Arrows-
3. -Arrows-
1.1.3 Summary of components - exhaust gas turbocharger, vehicles with particle
filter or with catalytic converter
1 - Connection fitting
❑ Removing and installing
⇒ "1.4 Removing and in‐
stalling the exhaust gas
turbocharger connec‐
tion fitting", page 290
2 - Screw
❑ 8 Nm
3 - O-ring
❑ Replace after disas‐
sembly
4 - Exhaust gas turbocharger
❑ Removing and installing
⇒ "1.2 Removing and in‐
stalling exhaust gas tur‐
bocharger", page 268
5 - Screw
❑ 8 Nm
6 - Mounting bracket
7 - Heat shield
8 - Gasket
❑ Replace after disas‐
sembly
9 - Nut
❑ Replace after disas‐
sembly
❑ Tightening torque and
tightening order
⇒ page 268
10 - Exhaust gas temperature
sender 1 - G235-
❑ Summary of components
⇒ "4.1 Summary of components - exhaust temperature regulation", page 455
❑ Removing and installing
⇒ "4.2 Removing and installing the exhaust gas temperature sender 1 G235 ", page 459
266
Rep. gr.21 - Turbocharging/supercharging
Specified torque
from inside to outside crosswise 11
Nm
from inside to outside crosswise
22 Nm
from inside to outside crosswise
22 Nm
• This action takes account of the
settling behaviour of the compo‐
nents.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�