Lambda Probe; Summary Of Components - Lambda Probe - Skoda Karoq 2018 Workshop Manual

Karoq 2018 ➤ , Kodiaq 2017 ➤
1.6/85; 2.0/110; 130; 140 kW TDI CR engine - Edition 06.2017
9

Lambda probe

⇒ "9.1 Summary of components - lambda probe", page 374
⇒ "9.2 Removing and installing Lambda probe", page 377
9.1 Summary of components - lambda
probe
⇒ "9.1.1 Summary of components - lambda probe, vehicles with‐
out SCR system", page 374
⇒ "9.1.2 Summary of components - lambda probe, vehicles with
SCR system", page 376
9.1.1 Summary of components - lambda probe, vehicles without SCR system
1 - Lambda probe 1 after cata‐
lytic converter - GX7-
❑ If present
❑ consists of: lambda
probe downstream of
catalytic converter -
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
G130- and heater for
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
lambda probe 1 down‐ with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
stream of catalytic con‐
verter - Z29-
❑ Removing and installing
⇒ "9.2.2 Removing and
installing Lambda probe
1 after catalytic convert‐
er GX7 ", page 378
❑ Follow the installation
instructions
⇒ page 380
❑ 52 Nm
2 - Exhaust gas temperature
sender 4 - G648-
❑ Removing and installing
⇒ "4.5 Removing and in‐
stalling the exhaust gas
temperature sender 4
G648 ", page 465
3 - Exhaust gas temperature
sender 1 - G235-
❑ Removing and installing
⇒ "4.2 Removing and in‐
stalling the exhaust gas
temperature sender 1
G235 ", page 459
4 - Exhaust gas temperature
sender 2 - G448-
❑ If present
❑ Removing and installing
⇒ "4.3 Removing and installing the exhaust gas temperature sender 2 G448 ", page 462
5 - Screw
❑ 8 Nm
6 - Differential pressure transmitter - G505-
❑ its use depends on exhaust gas standard
374
Rep. gr.23 - Mixture preparation - injection