Emerson Rosemount 3051P Reference Manual page 31

Reference Manual
00809-0700-4001
the test terminals on the terminal block, or shunting transmitter power through the meter
at some point in the loop.
Performing an analog loop test using a Field Communicator
Procedure
From the HOME screen, enter the Fast Key sequence.
Device Dashboard Fast Keys
Performing an analog loop test using AMS Device Manager
Procedure
1. Right click on the device and hover the cursor over Diagnostics and Test in the
2. Select Next after setting the control loop to manual.
3. Follow screen prompts to perform a loop test.
4. Select Finish to acknowledge the method is complete.
Performing an analog loop test using a local operator
interface (LOI)
To perform an analog loop test using the LOI, manually set the 4 mA, 20 mA, and custom
mA point.
Procedure
Reference
LOI.
Figure 2-14: Performing an Analog Loop Test Using an LOI
Rosemount 3051P
Methods dropdown menu. From the Diagnostics and Test dropdown menu, select
Loop Test.
Figure 2-14 for instructions on how to perform a transmitter loop test using an
Configuration
April 2020
3, 5, 1
31