Furuno FAR-2107 Series Service Manual page 81

4. Remove the TR limiter from the IF amplifier, loosening four screws.
TR limiter
5. Remove the IF amplifier mounting plate. This plate is not used again.
6. Mount the Isolator and diode limiter with the arrow pointing to the IF amplifier.
7. Fix the IF amplifier case to new plate.
Four screws fixing
diode limiter
IF amplifier
mounting plate
（03-154-5021-2）
Remove four screws. (Reuse)
Four Hex. slotted Sems A screws,
M4 x 12, fixing diode limiter
Fig. 4
IF Amplifier mounting
plate
TR limiter
(Not reuse)
Isolator
(FX0157)
Diode Limiter
(RU-9099)
Cable Clamp
(Remove the clamp from old plate and mount it to
new plate.)
Fig. 5
Fig. 6
3/4