Furuno FAR-2107 Series Service Manual page 486

Hide thumbs Also See for FAR-2107 Series:

19. Which chart card is read when 2 chart cards are inserted into CU-200?

- When two chart cards are inserted:

Priority is given to a card that includes Detailed Data of the chart and includes

the own ship position within the range of the chart.

- If both cards include Detailed Data of the chart, the card that was displayed

before updating is read.

- The FAR receives the chart data from CU-200 when the display is updated, for

example, the change of the range and others.

- Contents of Detailed Data: depth contour, place name, etc

20. Can the PSU-007 use commonly for different supply voltages?

See page.4-72.

As for the PSU-007, the supply voltages cannot use commonly. Four types of

the PSU-007 are available according to different types of gearboxes (antenna

motor). The models of thermal relays and their setting differ depending on the

motor power supply. The PSU-007 has a label showing a compatible gearbox on

21. Is RPU-013 used commonly for X-band and S-band?

See page.4-69.

The RPU-013 cannot be used commonly for X-band and S-band. To distinguish

the type of RPU-013, check the name plate for the output power. It is indicated

the power type next to the power input terminal. And then, check the power

input terminal for indicating ship's main. There are 8 types of the PWR boards

according to the differences in ship's main and antenna speed, and 2 types of HV

boards for 10 kW and for 25 kW/30 kW according to the output power. The

initial setting includes the setting of MODEL.

PWR board (ANT: rpm)

03P9339A (24 rpm)

03P9339B (42 rpm)

03P9339C (24 rpm)

03P9339D (42 rpm)

03P9338C (24 rpm)

03P9338D (42 rpm)

03P9338A (24 rpm)

03P9338B (42 rpm)

10 kW: HV-9017A

25/30 kW: HV-9017B

- FAR-2837SW